Vpinstruments | Networking

Networking
VPRouter Default IP address - Why?
The decision to use the default IP address of 10.0.0.254 for VPRouter was based on IETF standards. According to standards set forth in Internet Engineering Task Force (IETF) document, the following IPv4 address ranges are reserved by the IANA for ...
Is it possible to use DHCP for VPVision?
DHCP When DHCP is enabled in VPvision on one of the LAN ports other than LAN2, it will wait for a router to provide the system with an IP address. DHCP (the protocol) will supply the gateway, subnet mask, and IP address to the network interface. When ...

Vpinstruments | Networking | Help Center