Unreadable fields in VPStudio 1

Unreadable fields in VPStudio 1

Depending on the computer and also the resolution that is being used, there can be some unreadable fields or tabs within VPStudio 1.25

     


Idea
Solution

To solve this issue and make the software functional, below steps should be taken:
  1. Right-click on the icon of the software
  2. Go to Properties   
  3. Under the tab compatibility, click on Change high DPI settings 
  4. On the new window, tick the box to override high DPI scaling behavior and then select system and then click on ok
            



Notes
 In case this the solution above could not help you, please contact our support team for remote support:

    • Related Articles

    • USB Isolator for connection to VPStudio

      The VPFlowScope M can be connected to a computer and the VPStudio 4 software for adjusting settings or viewing real-time data. This connection can be made using either a JB5 kit or a USB Mini-B cable. However, when using a USB Mini-B cable, the power ...
    • Site visit preparation checklist

      SECURITY CHECK Check safety and personal protection gear. ALWAYS. Eye protection Ear protection Hard Hat Safety Boots Reflective vest Required Permits, Diplomas, Certification for work Equipment list Flowmeters: FlowScope dP with display FlowScope M ...
    • How to test communication through Modbus?

      Using Modpoll freeware ( VP recommendation) Download it from the links below https://www.vpinstruments.com/service-support/software-firmware or https://www.modbusdriver.com/modpoll.html Unzip the file, open command line (cmd), and change the ...